Casting Plates
(click here)

Vibration Isolation
(click here)
_  
  ENGINE TILTING TABLE
MULTI-AXIS SHAKING TABLE
AXLE TEST FIXTURE
- Standard Fixture EAB
- Suspension Development
- 6 Degree of Freedom (6 DoF)
- Acoustics and Modal Analysis
- Kinematics & Compliance
VIMM (VEHICLE INERTIA
MEASURING SYSTEM)
(NEW)
EXHAUST TEST RIG FIXTURE
  X-Y POSITIONING SYSTEMS
- 4-Poster Test System
- Head Impact Pendulum
- Driveline Test System
TORSIONAL SYSTEMS
PORTAL FRAMES
STEEL FLOORS
MAINTANANCE PLATFORM
ELEVATING TABLE
SPRING CLAMPS
FINITE ELEMENT ANALYSIS
SOFTWARE XiCon
SOFTWARE XiCon OIS
INTRODUCTION
MOCOKIT 25 (up to 5.5 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS
MOCOKIT 65 (up to 14 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS
MOCOKIT 250 (up to 55 kip)
- EXAMPLES
- COMPONENT LAYOUT
- COMPONENTS

Control Systems

For operating our positioning systems for complete vehicle tests rigs and 4-poster test rigs, a PC control is available as an alternative to the electrical manual control panel. The same applies to our 3-dimensional positioning system for accommodating and positioning passenger test systems.

The operating software XiCon for 2-dimenional and XiCon OIS for 3-dimensional positioning systems enables the manual, semi-automatic and fully automatic adjustment of the individual positioning drives depending on the selected mode of operation. With the help of the integrated database it is possible to save and automatically activate as many position values as required. In semi-automatic mode, manually entered values are executed automatically. In manual mode it is possible to change the position of the respective positioning system in inching mode.

Optimum handling is offered by the combination of manual and PC controlled controls. In teach-in mode it is possible to transfer manually executed positions into the integrated Database.

 





manual operated
pendant for 2 dof positioning systems
operating software XiCon
operating software XiCon OIS
manual operated
pendant for 3 dof positioning systems

XiCon

XiCon OIS
get the Acrobat Reader
_For more information: E-mail: contact@cfm-itbona.com Phone: +1 (952) 942-6104 FAX: +1 (952) 942-6106
   


 
Copyright@2002 - 2006 CFM-ITBONA LLC. All Rights reserved
CFM-ITBONA LLC, 4282 SHORELINE DRIVE, SPRING PARK, MN 55384, USA